|
|
|
SWAGED TENSIONER
Product Code STAT.TENSR001
• For use on StaticLine System.
• Suits 8mm Cable.
• Rated at 50kN.
• Stainless Steel construction.
|
SWAGELESS TENSIONER
Product Code STAT.TENSR002
• For use on StaticLine, simple installation.
• Suits 8mm Cable.
• Rated at 50kN.
• Stainless Steel construction.
|
|
|
|
SWAGED TERMINATION
Product Code STAT.TERMN001
• For use on StaticLine System.
• Suits 8mm Cable.
• Rated at 50kN.
• Stainless Steel construction.
|
SWAGELESS TERMINATION
Product Code STAT.TERMN002
• For use on StaticLine, affords simple termination.
• Suits 8mm Cable.
• Rated at 50kN.
• Stainless Steel construction.
|
|
|
|
SHOCK ABSORBER
Product Code STAT.ABSOR001
• For use on StaticLine System.
• Rated at 20kN.
• Absorbs 70% of a 20kN load with less than 6cm lengthening.
|
SAFELINK SHUTTLE
Product Code STAT.SHUTL001
• For use on StaticLine System.
• No need to disconnect from StaticLine as it passes easily over
intermediate T Bolts.
• Stainless Steel construction.
|
 |
 |
CONCRETELINK INTERMEDIATE T BOLT
Product Code STAT.CONCL001
• For use on StaticLine System.
• For use in concrete.
• Must be chemically fastened.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
CONCRETELINK END ASSEMBLY (2)
Product Code STAT.CONCL002
• For use on StaticLine System.
• For use in concrete.
• Must be chemically fastened.
• Stainless Steel construction.
• For use on pitches no greater than 15 degrees and lines no longer
than 25 metres.
|
 |
 |
CONCRETELINK END ASSEMBLY (3)
Product Code STAT.CONCL003
• For use on StaticLine System.
• For use in concrete.
• Must be chemically fastened.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
CONCRETELINK CORNER UNIT (2)
Product Code STAT.CONCL004
• For use on StaticLine System.
• For use in concrete.
• Must be chemically fastened.
• Stainless Steel construction.
• For use on pitches no greater than 15 degrees and lines no longer
than 25 metres.
|
 |
 |
CONCRETELINK CORNER UNIT (3)
Product Code STAT.CONCL005
• For use on StaticLine System.
• For use in concrete.
• Must be chemically fastened.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
HINGELINK INTERMEDIATE T BOLT
Product Code STAT.HINGE001
• For use on StaticLine System.
• For use on metal roof/timer in most cases or when access is
limited on timber structures.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
 |
 |
HINGELINK END ASSEMBLY (3)
Product Code STAT.HINGE003
• For use on StaticLine System
• For use on metal roof/timer in most cases or when access is
limited on timber structures.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
RAFTERLINK INTERMEDIATE T BOLT
Product Code STAT.RAFTR001
• For use on StaticLine System.
• For use on tile/timber with easy access.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
 |
 |
RAFTERLINK END ASSEMBLY (3)
Product Code STAT.RAFTR003
• For use on StaticLine System.
• For use on tile/timber with easy access.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
RETROLINK INTERMEDIATE T BOLT
Product Code STAT.RETRO001
• For use on StaticLine System.
• For use on metal roof/steel purlin structures.
• Used when there is little or no access from underside.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
 |
 |
RETROLINK END ASSEMBLY (2)
Product Code STAT.RETRO002
• For use on StaticLine System.
• For use on metal roof/steel purlin structures.
• Used when there is little or no access from the underside.
• Stainless Steel construction.
• For use on pitches no greater than 15 degrees and lines no longer
than 25 metres.
|
RETROLINK END ASSEMBLY (3)
Product Code STAT.RETRO003
• For use on StaticLine System.
• For use on metal roof/steel purlin structures.
• Used when there is little or no access from the underside.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
 |
 |
SURFACELINK INTERMEDIATE T BOLT
Product Code STAT.SURFL001
• For use on StaticLine System.
• To be mounted on the surface of a steel roof profile.
• Fitted where access to timber structure is difficult.
• Stainless Steel construction.
• For use on pitches no greater than 30 degrees.
|
SURFACELINK END UNIT (2)
Product Code STAT.SURFL002
• For use on StaticLine System
• To be mounted on the surface of a steel roof profile.
• Fitted where access to timber structure is difficult.
• Stainless Steel construction.
• Multidirectional end anchor.
• For use on pitches no greater than 15 degrees and lines no longer
than 25 metres.
|
 |
 |
SURFACELINK END UNIT (3)
Product Code STAT.SURFL003
• For use on StaticLine System
• To be mounted on the surface of a steel roof profile.
• Fitted where access to timber structure is difficult.
• Stainless Steel construction.
• Multidirectional end anchor.
• For use on pitches no greater than 30 degrees.
|
SURFACELINK CORNER UNIT (2)
Product Code STAT.SURFL004
• For use on StaticLine System
• To be mounted on the surface of a steel roof profile.
• Fitted where access to timber structure is difficult.
• Stainless Steel construction.
• Multidirectional corner unit.
• For use on pitches no greater than 15 degrees and lines no longer
than 25 metres.
|
 |
|
SURFACELINK CORNER UNIT (3)
Product Code STAT.SURFL005
• For use on StaticLine System
• To be mounted on the surface of a steel roof profile.
• Fitted where access to timber structure is difficult.
• Stainless Steel construction.
• Multidirectional corner unit.
• For use on pitches no greater than 30 degrees.
|
|
